Rolled Steel NEMA Motors
-
NEMA Single Phase Rolled Steel Frame ODP Motors
Open Drip Proof motors (ODP) designed for industrial application in order to have a compact and light solution for the customer. The platform was designed to meet the market requirements of optimized and rugged motors, complying with international standard dimensions, safety and performance requirements.
-
NEMA TEFC AC motor 1HP to 3HP single phase and three phase
Totally Enclosed Fan Cooled (TEFC)
Totally enclosed fan cooled motors are the same as totally enclosed non-ventilated(TENV) motors except they have an external fan as an integral part of the motor to provide cooling by blowing air over the outside frame.
1 HP Electric Motor General Purpose Single Phase Motor 3600 RPM 115/208-230V 1.15SF 56C Frame TEFC CW/CCW
-
1/2 hp, 1725 RPM, 115 volts, 48/56 Frame TENV blower motor
Totally Enclosed Non-Ventilated (TENV)
(TENV) Totally enclosed, not ventilated motor for use in dusty or damp environments
Rated at 1720 rpm 115v/208-230v
input voltage, single phase, 1/2hp
UL Listed and CSA certified for quality assurance
-
3/4 HP Belt Drive Motor Split-Phase 1750RPM, 115 Voltage Frame 56
NEMA RESILIENT BASE MOTORS
The NEMA RESILIENT BASE Motor is the perfect option for applications that require robustness, low weight and high performance in a single product. This Rolled Steel Single Phase motor has good thermal performance and easy installation and maintenance. Because of their high starting torque, they are particularly well-suited for heavy starting loads.
-
High Efficiency Three Phase Drip-proof 1HP to 20HP EPACT 143T to 256T Frame Motor
THREE PHASE ODP MOTORS 3 hp AC induction motor or asynchronous motor, NEMA B design, 3 phase, 2 pole, 3450rpm, 230/460 volt at 60 hertz, ODP enclosure or TEFC enclosure for choice. It features rolled steel frame with double shielded bearings, C face footed mounting, high efficiency continuous duty operation.
-
NEMA 56 frame capacitor-start general purpose TEFC motors
Totally Enclosed Fan Cooled (TEFC)
Four-in-one Motor, 56 TEFC Frame Detachable foot, with C-flange Capacitor Start and Capacitor Run. 1/2 HP General Purpose Motor,Capacitor-Start,1725 Nameplate RPM,Voltage 115/208-230,Frame 56C
-
JP Close-Coupled Totally Enclosed 1HP to 10HP 140T to 210T Frame Pump motor
Totally Enclosed Non-Ventilated (TENV)
Pump Motor, JP Close-Coupled, Totally Enclosed,1HP to 10HP,140T to 210T Frame, EPACT&EEV Certified
-
Capacitor Run 48 or 56 Frame Resilient Base NEMA Design Rolled Steel Motor
NEMA RESILIENT BASE MOTORS
Resilient Base Motor, Capacitor Run 48 or 56 Frame,CSA and CUS Approved,Rolled Steel, NEMA N Design
-
NEMA Capacitor Start and Capacitor Run General Purpose Motor Drip-proof, 1.15 Service Factor
ODP, 1HP 2HP 3 HP, 1800 RPM, 56C 145T , 184T. 213T, 215T Frame, 115v/208230v, 1PH, Capactior start and capacitro run, NEMA Design B, 60HZ, 1.15 S.F., ODP, Gen Purp, Rolled Steel, Prem Eff, Inverter Duty 1/3hp-10HP
-
56 Frame Premium Efficiency Rolled Steel 1.15 Service Factor AC motor
Totally Enclosed Fan Cooled (TEFC)
1hp 1.5hp 2HP 3hp, 5hp, 7.5hp 10hp Air Compressor MOTOR 1 PHASE, 1800 RPM, 3600RPM 115/208-230VAC, 56, 143T,182T. 184T FRAME, TEFC, SF1.15
-
JM Close-Coupled Pump Motor Totally Enclosed 1HP to 10HP 140T to 210T Frame
Three phase, enhanced performance closecoupled pump motors. steel housing 140JM.180JM,210JM and above, NEMA Premium Efficient. NEMA Design B. IP44
Features a multi-mount arrangement incorporating bolt on feet and flange mount configuration. 2 ,4 pole, 1 to 10HP.
-
PSC furnace blower motors AC condenser fan motor
NEMA RESILIENT BASE MOTORS
Permanent split capacitor (PSC) condenser fan AC motors run with a required capacitor that decreases the amount of power consumed for a given load making them more energy efficient than shaded pole motors. They have a high starting torque and energy efficient performance with a cooler operating temperature.